AERATOR PUMPS
TSUNAMI AERATOR PUMPS
With their innovative engineering and compact design, Tsunami pumps deliver high output from a small package. We use the most advanced material available, including the best quality bearings and state-of-the-art brushes, alloys and magnets. Our patented shaft seal prevents leaks caused by misalignment and our caulked and tinned wiring eliminates wicking, prevents water damage and resists corrosion.
90° threaded hose-to-barb connector
Straight threaded hose-to-barb connector
Motor cartridge locks for secure placement and unlocks for easy cleaning, maintenance and replacement Water-cooled housing reduces heat buildup to extendmotor life
Engineered composite inlet and body withstand stresses associated with hull pounding and resist deteriorating effects of caulks Thread sizes accommodate standard filter screens, 3/4”- 14 NPSM thread onT500 and T800 aerator, and 1”-11.5 NPSM thread onT1200 aerator
PUMP DIMENSIONS
Model No. Application A
B
C D E
F
G
Thru-Hull Seacock Thru-Hull Seacock Thru-Hull Seacock
3-1/2" or 1-1/2" 3" or 1" 3-1/4" 2-7/8" 3-5/8" 3/4-14 NPSM 3/4-14 NPSM
T500
1-1/2"
1"
3-1/4" 2-7/8" 3-5/8" 3/4-14 NPT 3/4-14 NPSM
3-1/2" or 1-1/2" 3" or 1" 3-7/8" 3-1/4" 4"
3/4-14 NPSM 3/4-14 NPSM 3/4-14 NPT 3/4-14 NPSM
T800
1-1/2"
1"
3-7/8" 3-1/4" 4"
3-1/2" or 1-1/2" 3" or 1" 4"
3-1/4" 4-7/8" 1-3/8-12 UNF 1-3/8-12 UNF 3-1/4" 4-7/8" 1-11-1/2 NPT 1-3/8-12 UNF
T1200
1-1/2"
1"
4"
SPECIFICATIONS
GPH Output @ Design Voltage 13.6 VDC
GPH Output @ Nominal Voltage 12.0 VDC
Model No.
Design Voltage
Amp Draw
0 ft.
3.3 ft. 6.7 ft. Max Head
Amp Draw
0 ft.
3.3 ft. 6.7 ft. Max Head
Fuse Size
Hose Size
T500 12 T800 12 T1200 12
1.8
500 440 260 9 ft. 800 670 525 9 ft. 1200 840 570 9 ft.
1.4 2.5
450 330 160 8 ft. 750 555 370 8 ft. 1140 790 450 8 ft.
3-amp 3/4" I.D. 4-amp 3/4" I.D. 5-amp 1-1/8" I.D.
3
3.5
3
TSUNAMI AERATOR PUMPS & ACCESSORIES No mounting brackets necessary.
Model No.
Inlet Length & Diameter
Outlet Style & I.D. Diameter
Rated Voltage
Wire/ Connector
Bulk Packaging
Aftermarket Packaging**
Tsunami Bilge Pumps
4640-1 4640-7
3-1/2" L x 3/4" 1-1/2" L x 3/4" 7/8" L x 3/4" 3-1/2" L x 3/4" 1-1/2" L x 3/4"
Threaded - 3/4" Threaded - 3/4" Threaded - 3/4" Threaded - 3/4" Threaded - 3/4"
12-volt 29" wire 12-volt 29" wire
4640
4641-1 -
T500
12-volt 29" wire used with 3/4" seacock 4643-1 4643-7
4650-1 4650-7
T800
12-volt 29" wire 12-volt 29" wire
4651-1 -
4660-1 4660-7
4650
3-1/2" L x 1-1/8" Threaded - 1-1/8" 12-volt 29" wire 1-1/2" L x 1-1/8" Threaded - 1-1/8" 12-volt 29" wire
4661-1 - 4663-1 -
T1200
7/8" L x 1"
Threaded - 1-1/8" 12-volt 29" wire used with 1" seacock
Tsunami Replacement Motor Cartridges T500
- - -
4620-6 4622-6 4624-6
12-volt 29" wire 12-volt 29" wire 12-volt 29" wire
T800 T1200
4660
**-6 = Blister, -7 = Clamshell
PUMPS, PLUMBING, WATER AND GAS
129
Powered by FlippingBook